The wiring kit you selected, Tow Ready Custom Fit Vehicle Wiring, part # 118491, would just give you a 4-way connector at the rear of your 2009 Honda Pilot, only requiring one relay.
The other wiring kit that we offer, Honda Pilot Replacement OEM Tow Package Wiring # 118253, includes 2 relays as it is a replacement for the OEM tow package wiring. Part # 118253 would require 2 relays as it gives you a 7 way connector. The kit that you referenced from Honda is more than likely part # 118253.
If... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11127 is a confirmed fit for 2012-2015 Mazda 5 models. It does come with pin and clip, but the ball mount is sold separately. For a ball mount, I recommend the Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs # C45520. You will also want a hitch ball like # C40001 for a 1-7/8 inch or # C40018 for a 2 inch.
For your vehicle trailer connection, I recommend the T-One Vehicle Wiring Harness with 4-Pole... view full answer...
For your 2013 Ford Flex with a factory 7-Way, the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 is a great choice. As you mentioned in your question, the Plug-In Wiring Adapter # 22292 is all that you will need to install the unit. One end of the adapter will plug into the controller and the other end will connect to the built-in harness beneath your vehicle's dash.
These are separate part numbers that are combined when going through the vehicle fit guide. You will need both part... view full answer...
The Draw-Tite Trailer Hitch Receiver, part # 24847, is a great choice for your 2012 Toyota Prius. It does not include the ball mount, pin and clip, or wiring harness.
The recommended ball mount is part # 3593 which comes with the pin and clip. For hitch balls use part # 19258 for a 2 inch or part # 19256 for a 1-7/8 inch.
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118505 allows you to quickly and easily install a 4-way trailer connector on your Toyota Prius... view full answer...
The Redarc Tow-Pro Liberty Brake Controller # RED24FR does not include any harnesses for connecting to a tow vehicle. For a universal installation you will need their Universal Wiring Harness # RED69FR. Redarc does offer several custom fit harness which will allow you to plug into specific vehicles and we do also have the Redarc to Tekonsha Adapter # 331-TPH-017 which will plug and play with Tekonsha wiring adapters if you use their Universal 7-Way Harness # 22551. view full answer...
Yes, the etrailer Trailer Hitch # e98912 does include all the hardware needed for installation on your 2022 Subaru Crosstrek, along with a set of installation instructions.
If you need wiring as well, I recommend # C56040. This is a custom fit vehicle wiring harness that plugs quick and easy into your factory wiring for a simple install. view full answer...
The Draw-Tite Class II Trailer Hitch, item # 36501, for the 2011 Ford Escape does not include the wiring harness for the vehicle.
For trailer lighting you will need the Tow Ready Custom Fit Vehicle Wiring, item # 118551, for your 2011 Ford Escape. I have posted installation instructions and an install video for you to review.
You may also want to consider the following items to complete your Class II towing setup.
Draw-Tite Ball Mount, item # 36051
Hitch Ball, item # 19258
Hitch Ball,... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75214 for your 2015 Ford Edge does not come with a wiring harness. For the wiring harness I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118669 which will connect to your tail light wiring harness perfectly. Then you can use mounting bracket # 18144.
For a ball mount I recommend the etrailer kit # 989900 to give you multiple options at a great price so you can tow many trailers... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11473 you were looking at for your 2017 Toyota Prius Two does not include a vehicle wiring harness.
You will need to purchase one separately using # 118701 as long as your Prius is not the Prime model.
To finish your towing setup you will also need drawbar # C45521, 1-7/8" hitch ball # A-80 or 2" hitch ball # A-82, and hitch pin and clip # F-4.
I included videos of the products mentioned for you to take a look at. view full answer...
Roadmaster EZ5 Base Plate Kit # RM-521567-5 consists of the main base plate assembly that bolts on to the CR-V and the removable twist-lock arms that connect to a compatible tow bar like the Falcon All Terrain # RM-522. Lighting/wiring components for the towed vehicle are not included with the kit but you can see such items using the linked page.
Wiring/lighting kit options for your CR-V include custom-fit plug-in harnesses like the Hopkins # HM56304, magnetic light kits like # TL21RK... view full answer...
The P3 brake controller # 90195 comes with a universal pigtail with one end that plugs into the brake controller and the other end with just wires. The vehicle specific pigtail with plugs on both ends is sold separately. For your 2016 Toyota Tacoma with factory tow package you would need pigtail # 3031-P like you said. view full answer...
When it comes to installing a trailer hitch on your 2022 Toyota Highlander The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e75ZR is confirmed for your vehicle.
This hitch has a simple bolt-on installation with no welding required, the hitch has a matte black powder coat finish over a protective base coat which offers superior rust resistance.
When it comes to the trailer wiring The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector... view full answer...
Yes, all of the trailer hitches for the 2004 PT Cruiser include all necessary installation hardware. Keep in mind that depending on the hitch you pick you may need to purchase the ball mount, pin and clip. Also you will need to purchase the appropriate sized hitch ball. You may also be interested in a wiring harness. Part # C55532 is a custom fit for your vehicle. view full answer...
I went out to the warehouse and pulled the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, part # HM56200, which you reference. The kit contains four connectors, which will be plugged into the connection points located behind your vehicle's tail lights on both the driver's side and the passenger side (two per side).
We are in the process of updating the product page with new photos of part # HM56200. view full answer...
Brake controllers come with a basic pigtail wiring harness for hardwire installation, or they can come with a connector made to join with a vehicle-specific wiring adapter on vehicles that have a specific port for brake controllers. Since your 2004 Jeep Grand Cherokee does NOT have such a port under the dash any brake controller you install will be a hardwired installation.
If the GC has no factory trailer socket at the rear then brake controller installation will require our all-inclusive... view full answer...
There is actually no hardware that comes with or is needed to purchase separately for the etrailer Trailer Hitch Receiver # e98901 or its counterpart, the Curt Trailer Hitch Receiver # C13182, both of which fit your 2019 Jeep Grand Cherokee (the only difference being the black matte finish of the etrailer hitch vs. the glossier black of the Curt).
The reason why is that the hitch will install with existing bolts on your 2019 Grand Cherokee, as you can see by the accompanying cut out of... view full answer...
Having a slider enables your vehicle to make normal turns during low-speed maneuvers and in narrow spaces without fear of your trailer's contacting the cab of your vehicle. Other sliders require you to get out and manually operate the slider which be somewhat of a hassle.
You're correct that the B&W Patriot # BWRVK3270, is a great fifth wheel hitch. It uses a dual jaw and has a maximum capacity up to 18,000 pounds. to use the Patriot in your Ram you need an install bracket kit like# BWRVK2600... view full answer...
The price for the Westin Signature Series Step Bars, Black Powder Coated, for Nissan Pathfinder, part # 25-1225, includes the cost of both nerf bars and all the required installation hardware. It is custom fit for your 1997 Nissan Pathfinder 4 door, and you should have no problems installing these bars on your vehicle. view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1016 has a custom installation kit for your 2017 Chevrolet Silverado 2500. This kit has the mounting brackets that are designed for the mounting holes currently in your Silverado's frame. This allows you to install the Gooseneck Hitch without having to drill into or weld onto your frame. I attached our install video of this hitch onto a 2017 Zchevrolet Silverado 2500 if you want to check that out below.
Once you install a gooseneck... view full answer...
I can understand why this might be frustrating. When it comes to installing the Curt Spectrum # C51170 in your 2019 Toyota Tacoma, you can hardwire the controller in to the vehicle and no additional parts or wiring are required. For this reason, the Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # C51455 adapter isn't a required part to complete installation; it's more of a convenience to use than a required part. These adapters are also vehicle specific, which... view full answer...
Go To Results